Amerec AK14
AK Series 14KW Steam Shower Generator
The Amerec AK14 is a 14kW home steam shower generator engineered for home and day spa steam baths up to 550 adjusted cubic feet (ACF).
Required control package sold separately.
The Amerec AK14 is engineered for home and day spa steam baths up to 550 adjusted cubic feet (ACF).
The Amerec AK14 steam shower generator is constructed of durable stainless-steel for years of reliable, efficient operation. The AK14 includes industrial-strength heating elements, durable electronic components and parts, electronic water-level control system, and several other innovative components.
Amerec AK Series steam generators are designed to provide the most consistent temperature during the steam bath. The AK14 steam unit uses a Sequential Temperature which ensures a consistent flow of soft steam and a more pleasurable bathing experience.
The Amerec AK14 steam shower generator is engineered for long-lasting performance and durability. The unit is equipped with a corrosion-resistant stainless-steel tank, water level probes, and removable heating elements for easy and economical service.
The compact size of the AK14 allows the steam shower unit to be installed conveniently out of sight in closets, vanities, cabinets, and other similar locations.
The Amerec AK14 14kW steam generator is available in 240V or 208V and can be field wired for single-phase or three-phase configurations.
The Amerec AK14 generator is engineered to power the most demanding home and commercial steam room environments. Homeowners, health clubs, and day spas rely on the Amerec AK Series generators for dependable daily use.
Amerec AK Series residential steam shower generators can be linked in tandem to accommodate steam shower enclosures larger than 550 adjusted cubic feet. Connection cables are sold separately, and each generator requires a ComfortFlo steam head.
The Amerec AK14 steam bath generator requires the available K3 control for operation which regulate bathing duration and temperature, or the R30K 30-minute timer. Each control package includes a matching finish ComfortFlo steam head. The AK14 requires the purchase of a second ComfortFlo steam head.
We recommend Amerec's Automatic Drain System with your AK14 which drains the generator tank after each use to help prevent lime-build up and calcification of the unit.
The Amerec AK14 steam room generator carries a limited lifetime warranty and is fully serviceable. Amerec AK series generators are UL, CSA, and CSE listed to ensure your safety.
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire phase
- Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- 14KW steam bath generator
- Installation and operation manual
- Limited warranty
Model | AK14 |
---|---|
Minimum Adjusted Cubic Feet | 350 |
Maximum Adjusted Cubic Feet | 550 |
Kilowatt Rating (KW) | 14kW |
Shipping Weight (Lbs.) | 35 lbs |
AC Voltage | 240V AC |
DC Voltage | 5V DC |
Phase | Single Phase |
Nominal Amperage | 21/38Amps |
Recommended Protective Device | 30/50 Amp |
Recommended Minimum Copper Wire Supply | 10/8 AWG |
Water Supply Connection | 3/8" NPT |
Generator Steam Line Connection | 1/2" NPT |
Steam Head Connection | 1/2" NPT |
Drain Connection | 3/4" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 10 PSIG |
Control "Rough In" Cut Out | 2-3/8" Diameter |
Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 7/8" Diameter |
Generator Control Connection | 8 Pin, Snap-In Connector |
Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
Width In Inches | 16-1/2" |
Depth In Inches | 6-1/4" |
Height In Inches | 15" |
Glacier K2 Operating Equipment Package for AK Series Generators. Includes steam head.
Columbia K3 Operating Equipment Package for AK Series Generators. Includes steam head.
The Amerec K2 steam shower generator control kit works with Amerec AK series steam generators. Wi-Fi and Smart home ready, this control features adjustable time, temperature and a 24 hour delay and includes a ComfortFlo steam head.
6 different Trim Ring/Steam head finishes for the K2 control are available.
The Amerec K3 steam shower generator control kit works with Amerec AK series steam generators. This control kit is able to be mounted inside or outside the steam room and features a digital control, remote sensor and includes a ComfortFlo steam head.
6 different Steam head finishes for the K3 control kit are available.
The Amerec KT3 steam shower generator control kit works with Amerec AK series steam generators. A stylish update to Amerec's KT60 control, the control is backward compatible with the classic KT60. Featuring a built-in temperature sensor, this control was designed for use inside the steam room. With the simple ease of 3-buttons, you control on/off, temperature, and time duration settings. The display alternates every 5 seconds between atmospheric room temperature and the remaining time of your steam session. With maximum session settings of up to 125 °F and 60 minutes (residential use), this control kit includes a ComfortFlo steam head.
6 different Steam head finishes for the KT3 control kit are available.
The Amerec K4 steam shower generator control kit works with Amerec AK-series steam bath generators. This control kit may be mounted inside or outside the steam room and features a non-thermostatic control and includes a ComfortFlo steam head.
Choose from 6 available designer finishes for the ComfortFlo steam head.